Catalog › Continental MPC56x › PTL1XWRA
PTL1XWRA — stock MaxxForce calibration
Stock MaxxForce calibration PTL1XWRA - Continental MPC56x, ECM (engine), 8.75 MB flash image. Decoded from NavKal .nav.zenc.
PTL1XWRAThis is a replacement calibration. It supersedes PTL1XHRC, PTL1XURA, PTL1XURB.
File details
- File name
PTL1XWRA.nav.zenc- Cal ID
PTL1XWRA- Make / model
- -
- Software number
- -
- Rated power
- -
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- NavKal container
- Module type
- ECM (engine)
- ECU
- Continental MPC56x
- Microcontroller
- Freescale MPC56x (PowerPC)
- Vendor markers
- VDOERCOSEKSIEMVDO
- Version markers
- MPC56x
- Emissions hardware
- DPFDEF
- Flash image size
- 9,174,848 bytes (8.75 MB)
- Programmed area
- 18.2% non-blank
- Container format
- NavFile
- Encrypted size
- 634,440 bytes
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- 8583cdc603a130de2c80e9b4bb38db08f8446ce03f47d66ecf6fdea094179de4
- SHA-256 (.nav.zenc)
- 63d755606a3a0d36e8e5d1065df6be9b0f7fa5ce52a20783328e0547bbc82dcb
- SHA-256 (WinOLS read)
- -
Companion module 1 paired
The calibration Navistar paired with this ECM in the same build. Where that module's own file is in this catalog the ID links to it.
| Calibration | Module |
|---|---|
RPLBAG14 | ACM (aftertreatment control module) |
Factory parameters 1 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Engine / Powertrain Warning And Protection System | |
| Fuel Pump Controller Diagnostic Enable | 0 |
Other Continental MPC56x files
PAG1SKSE, PAG1SKSF, PAG2SKH2, PAG2SKRC, PAG2SKRD, PAG2SKRE, PAG2SKRF, PAG2SKRG, PAG2SKRH, PAK1SKR2, PAK1SKRA, PAL1XWR3