Catalog › Continental MPC56x › PAG1SKSF
PAG1SKSF — stock MaxxForce calibration
Stock MaxxForce calibration PAG1SKSF - Continental MPC56x, ECM (engine), 8.75 MB flash image. Decoded from NavKal .nav.zenc.
Cal ID
PAG1SKSFECU platform
Continental MPC56x
Flash size
8.75 MB
Rated power
-
This is a replacement calibration. It supersedes PAG1SJRB, PAG1SJRU, PAG1SKRD, PAG1SKRM, PAG1SKRU.
Need this stock file?
Original calibration PAG1SKSF — delivered ready to flash.
Request it — $20
File details
- File name
PAG1SKSF.nav.zenc- Cal ID
PAG1SKSF- Make / model
- -
- Software number
- -
- Rated power
- -
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- NavKal container
- Module type
- ECM (engine)
- ECU
- Continental MPC56x
- Microcontroller
- Freescale MPC56x (PowerPC)
- Vendor markers
- VDOERCOSEKSIEMVDO
- Version markers
- MPC56x
- Emissions hardware
- -
- Flash image size
- 9,174,848 bytes (8.75 MB)
- Programmed area
- 16.8% non-blank
- Container format
- NavFile
- Encrypted size
- 546,200 bytes
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- c757f65e64b0f5ad5f17677a484364985877fe611d4c421a4c90cfc01694db0e
- SHA-256 (.nav.zenc)
- 18031da9f4e40f1ffc105c6e5b24ea94fd7f6c6c0d4feb04f5463b7b51f5c725
- SHA-256 (WinOLS read)
- -
Factory parameters 12 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Coolant Temperature Compensation | |
| Coolant Temperature Compensation | 6.1875 |
| Coolant Temperature to Begin Power Derate | 107 |
| Coolant Temperature to Modify Power Derate Percent | 109.5 |
| Cruise Control | |
| Cruise Control Vehicle Speed Low Limit | 25 |
| Engine / Powertrain Warning And Protection System | |
| Engine Oil Critical Pressure for Region 1 | 2 |
| Engine Oil Critical Pressure for Region 2 | 5 |
| Engine Oil Critical Pressure for Region 3 | 12 |
| Engine Oil Warning Pressure for Region 1 | 5 |
| Engine Oil Warning Pressure for Region 2 | 10 |
| Engine Oil Warning Pressure for Region 3 | 20 |
| Engine Air / Gas Management (Engine Configuration) | |
| Minimum Vehicle Speed at which Normal Regen can be enabled | 0 |
| Engine Signal Enables | |
| Engine Fuel Pressure Signal Enable | 1 |
Other Continental MPC56x files
PAG1SKSE, PAG2SKH2, PAG2SKRC, PAG2SKRD, PAG2SKRE, PAG2SKRF, PAG2SKRG, PAG2SKRH, PAK1SKR2, PAK1SKRA, PAL1XWR3, PAL1XWRA