Catalog › Continental MPC56x › PBW5EJW0
PBW5EJW0 — stock MaxxForce calibration
Stock MaxxForce calibration PBW5EJW0 - Continental MPC56x, ECM (engine), 9.25 MB flash image. Decoded from NavKal .nav.zenc.
PBW5EJW0This is a replacement calibration. It supersedes PBW5EEW0, PBW5EGW3, WBW5EJWA.
File details
- File name
PBW5EJW0.nav.zenc- Cal ID
PBW5EJW0- Make / model
- -
- Software number
- -
- Rated power
- -
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- NavKal container
- Module type
- ECM (engine)
- ECU
- Continental MPC56x
- Microcontroller
- Freescale MPC56x (PowerPC)
- Vendor markers
- VDOERCOSEKSIEMVDO
- Version markers
- MPC56x
- Emissions hardware
- DPFDEF
- Flash image size
- 9,699,136 bytes (9.25 MB)
- Programmed area
- 20.0% non-blank
- Container format
- NavFile
- Encrypted size
- 739,576 bytes
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- 19f6a0a06b159b8b741bda8bc82b924fd0cbe6799d5d2406c4c7da9aeaa8ccac
- SHA-256 (.nav.zenc)
- f1a158a628f0464b54f83b41d513bcd523801e077a67db3afec746ee9187028a
- SHA-256 (WinOLS read)
- -
Companion module 1 paired
The calibration Navistar paired with this ECM in the same build. Where that module's own file is in this catalog the ID links to it.
| Calibration | Module |
|---|---|
RPRBBA10 | DCU (DEF dosing control unit) |
Factory parameters 1 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Engine / Powertrain Warning And Protection System | |
| Fuel Pump Controller Diagnostic Enable | 0 |
Other Continental MPC56x files
PAG1SKSE, PAG1SKSF, PAG2SKH2, PAG2SKRC, PAG2SKRD, PAG2SKRE, PAG2SKRF, PAG2SKRG, PAG2SKRH, PAK1SKR2, PAK1SKRA, PAL1XWR3