Catalog › Continental MPC56x › PBL6XWW2
PBL6XWW2 — stock MaxxForce calibration
Stock MaxxForce calibration PBL6XWW2 - Continental MPC56x, ECM (engine), 8.75 MB flash image. Decoded from NavKal .nav.zenc.
PBL6XWW2File details
- File name
PBL6XWW2.nav.zenc- Cal ID
PBL6XWW2- Make / model
- -
- Software number
- -
- Rated power
- -
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- NavKal container
- Module type
- ECM (engine)
- ECU
- Continental MPC56x
- Microcontroller
- Freescale MPC56x (PowerPC)
- Vendor markers
- VDOERCOSEKSIEMVDO
- Version markers
- MPC56x
- Emissions hardware
- DPF
- Flash image size
- 9,174,848 bytes (8.75 MB)
- Programmed area
- 18.2% non-blank
- Container format
- NavFile
- Encrypted size
- 628,304 bytes
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- 9c17fcdab0691f4865ecc6e73762d59734102099a08815c3fe0997ceaaac897a
- SHA-256 (.nav.zenc)
- b345139d1995a4e791daf3f8168ef2ba72fdcb91b2c9504ef5437b6aa41cc130
- SHA-256 (WinOLS read)
- -
Companion module 1 paired
The calibration Navistar paired with this ECM in the same build. Where that module's own file is in this catalog the ID links to it.
| Calibration | Module |
|---|---|
RPLBAG14 | ACM (aftertreatment control module) |
Factory parameters 1 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Engine / Powertrain Warning And Protection System | |
| Fuel Pump Controller Diagnostic Enable | 0 |
Other Continental MPC56x files
PAG1SKSE, PAG1SKSF, PAG2SKH2, PAG2SKRC, PAG2SKRD, PAG2SKRE, PAG2SKRF, PAG2SKRG, PAG2SKRH, PAK1SKR2, PAK1SKRA, PAL1XWR3