Catalog › Continental MPC56x › PBG1SKSE
PBG1SKSE — stock MaxxForce calibration
Stock MaxxForce calibration PBG1SKSE - Continental MPC56x, ECM (engine), 8.75 MB flash image. Decoded from NavKal .nav.zenc.
PBG1SKSEThis is a replacement calibration. It supersedes 4BG1RX13, PBG1RDR0, PBG1RFR0, PBG1RFR1, PBG1RJR0, PBG1RJR1, PBG1RJR2, PBG1RPR3, PBG1RRR0, PBG1RRR1, PBG1RTR0, PBG1RTRK and 21 more.
File details
- File name
PBG1SKSE.nav.zenc- Cal ID
PBG1SKSE- Make / model
- -
- Software number
- -
- Rated power
- -
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- NavKal container
- Module type
- ECM (engine)
- ECU
- Continental MPC56x
- Microcontroller
- Freescale MPC56x (PowerPC)
- Vendor markers
- VDOERCOSEKSIEMVDO
- Version markers
- MPC56x
- Emissions hardware
- -
- Flash image size
- 9,174,848 bytes (8.75 MB)
- Programmed area
- 16.8% non-blank
- Container format
- NavFile
- Encrypted size
- 546,192 bytes
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- bfc63036a387d364c26981fffe83664df2a5dd47ac77d3d963b36fc43ec123f2
- SHA-256 (.nav.zenc)
- 99768e5b09a3ef0c484d2b7ee334c113c8c21be0b7aead38caee52566baded37
- SHA-256 (WinOLS read)
- -
Factory parameters 12 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Coolant Temperature Compensation | |
| Coolant Temperature Compensation | 6.1875 |
| Coolant Temperature to Begin Power Derate | 107 |
| Coolant Temperature to Modify Power Derate Percent | 109.5 |
| Cruise Control | |
| Cruise Control Vehicle Speed Low Limit | 25 |
| Engine / Powertrain Warning And Protection System | |
| Engine Oil Critical Pressure for Region 1 | 2 |
| Engine Oil Critical Pressure for Region 2 | 5 |
| Engine Oil Critical Pressure for Region 3 | 12 |
| Engine Oil Warning Pressure for Region 1 | 5 |
| Engine Oil Warning Pressure for Region 2 | 10 |
| Engine Oil Warning Pressure for Region 3 | 20 |
| Engine Air / Gas Management (Engine Configuration) | |
| Minimum Vehicle Speed at which Normal Regen can be enabled | 0 |
| Engine Signal Enables | |
| Engine Fuel Pressure Signal Enable | 1 |
Other Continental MPC56x files
PAG1SKSE, PAG1SKSF, PAG2SKH2, PAG2SKRC, PAG2SKRD, PAG2SKRE, PAG2SKRF, PAG2SKRG, PAG2SKRH, PAK1SKR2, PAK1SKRA, PAL1XWR3