Catalog › Continental SID904 › PMG1SKSE
PMG1SKSE — stock MaxxForce calibration
Stock MaxxForce calibration PMG1SKSE - Continental SID904, ECM (engine), 8.75 MB flash image. Decoded from NavKal .nav.zenc.
PMG1SKSEThis is a replacement calibration. It supersedes 4MG1RX13, PMG1RDR0, PMG1RFR0, PMG1RFR1, PMG1RJR0, PMG1RJR1, PMG1RJR2, PMG1RPR3, PMG1RRR0, PMG1RTR0, PMG1SAR1, PMG1SBR0 and 13 more.
File details
- File name
6-6-2023_(23-55-24)International_Maxxforce_Maxxforce_Siemens-Continental_SID904__NS0D00__225PS_165kWPMG1SKSE_NS0D00__Original- Cal ID
PMG1SKSE- Make / model
- International Maxxforce
- Software number
- NS0D00
- Rated power
- 225 PS / 165 kW
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- WinOLS read · 1 read(s) on file
- Module type
- ECM (engine)
- ECU
- Continental SID904
- Microcontroller
- -
- Vendor markers
- -
- Version markers
- -
- Emissions hardware
- -
- Flash image size
- 9,174,848 bytes (8.75 MB)
- Programmed area
- 16.8% non-blank
- Container format
- raw binary (WinOLS read)
- Encrypted size
- -
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- d52a7c2fbe1fe3d9f8a741724236e3fe3fce71abbc93ec3aecd3339f3b7fa88c
- SHA-256 (.nav.zenc)
- -
- SHA-256 (WinOLS read)
- d52a7c2fbe1fe3d9f8a741724236e3fe3fce71abbc93ec3aecd3339f3b7fa88c
Factory parameters 12 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Coolant Temperature Compensation | |
| Coolant Temperature Compensation | 6.1875 |
| Coolant Temperature to Begin Power Derate | 107 |
| Coolant Temperature to Modify Power Derate Percent | 109.5 |
| Cruise Control | |
| Cruise Control Vehicle Speed Low Limit | 25 |
| Engine / Powertrain Warning And Protection System | |
| Engine Oil Critical Pressure for Region 1 | 2 |
| Engine Oil Critical Pressure for Region 2 | 5 |
| Engine Oil Critical Pressure for Region 3 | 12 |
| Engine Oil Warning Pressure for Region 1 | 5 |
| Engine Oil Warning Pressure for Region 2 | 10 |
| Engine Oil Warning Pressure for Region 3 | 20 |
| Engine Air / Gas Management (Engine Configuration) | |
| Minimum Vehicle Speed at which Normal Regen can be enabled | 0 |
| Engine Signal Enables | |
| Engine Fuel Pressure Signal Enable | 1 |
Other Continental SID904 files
PAG1SJR4, PAG1SKRC, PAG1SKRE, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ, PAG1SKRJ