Catalog › Bosch EDC17 › OLPXDGEA
OLPXDGEA — stock MaxxForce calibration
Stock MaxxForce calibration OLPXDGEA - Bosch EDC17, ECM (engine), 3.00 MB flash image. Decoded from NavKal .nav.zenc.
OLPXDGEAThis is a replacement calibration. It supersedes OLPXDEEB, OLPXDEEC, OLPXDFEA, OLPXDHEA.
File details
- File name
OLPXDGEA.nav.zenc- Cal ID
OLPXDGEA- Make / model
- -
- Software number
- -
- Rated power
- -
- Engine
- not verified unverified
- Rating code
- -
- What we hold
- NavKal container
- Module type
- ECM (engine)
- ECU
- Bosch EDC17
- Microcontroller
- Infineon TriCore
- Vendor markers
- ERCOSEK
- Version markers
- EDC17C04
- Emissions hardware
- -
- Flash image size
- 3,145,728 bytes (3.00 MB)
- Programmed area
- 73.8% non-blank
- Container format
- NavFile
- Encrypted size
- 1,249,968 bytes
- Cal ID in flash
- yes - confirmed in the decoded image
- SHA-256 (decoded)
- 881e2009fb369b683f4d93afa84f5dbd2ca19d350d77ce4dce854263942cb0a2
- SHA-256 (.nav.zenc)
- 70ca92a73bcb75f7945bebbf081655e3c08d3d90650e5e1eea89bcf185623d1b
- SHA-256 (WinOLS read)
- -
Companion module 1 paired
The calibration Navistar paired with this ECM in the same build. Where that module's own file is in this catalog the ID links to it.
| Calibration | Module |
|---|---|
OKXMCXC | ACM (aftertreatment control module) |
Factory parameters 1 settings
Programmed values for this calibration, from Navistar's own configuration records. These are the settings as built, not a reading from any particular truck — anything reprogrammed since will differ. About half of these are platform-wide defaults that are identical across calibrations; the ones that vary are mostly the warning and protection thresholds.
| Parameter | Value |
|---|---|
| Engine / Powertrain Warning And Protection System | |
| SCR Tamper Resistant Warning & Protection System First Fault Occurrence | 0 |
Other Bosch EDC17 files
OAAXKKMB, OKBXDGDA, OKBXDGEA, OKBXDGMA, OKCADGAA, OKCADGMA, OKDADGAA, OKDADGMA, OKEADGAA, OKEADGDA, OKEADGMA, OKFADGDA